SOLUTION 4 - STEAM CONTROL FOR HT PREHEATER
Steam Control valve
OPTIMIZE STEAM CONTROL FOR
PRE-HEATING AND SAVE FUEL
Download: Solution 4 - Steam Control valve
OPTIMIZE STEAM CONTROL FOR
PRE-HEATING - AND SAVE FUEL
Avoid energy losses on your HT reheating system with automatic regulated steam valves.
Replacing manual steam valves with electric-controlled valves can reduce fuel consumption for steam generation,
mostly produced on Aux-boilers when the ship is at port.
BROEN Clorius Controls offers a complete valve & controller set allowing easy replacement of manually controlled
steam valve with automatic controlled steam valves.
Take control with BROEN Clorius Controls solutions
Benefits using our valves
• Energy optimization on steam and boiler systems
• Reduces fuel / oil consumption for steam generation
• Accurate temperature control of engine pre-heating
• Easy access to support and spare parts
• Avoid energy losses on your HT cooling system
Up to 40% savings measured by shipowner
BROEN Clorius Controls offers
• Complete valve & controller set, easy to install
• Automatic regulated steam valves ranging from DN15 up to DN300
• Can be delivered with actuators for electrical or pneumatic controls
• Sized based on actual system pressure & low data
• Low investment cost with good savings to be achieved
FROM MANUALLY TO AUTOMATIC CONTROLLED STEAM VALVES
Test result on a test vessel showed a fuel
consumption of 100 kg/h with a manually
controlled valve. After installing an electrically
controlled valve, the fuel consumption was
reduced to approximately 60 kg/h.
Test result
Significant reduction of fuel consumption with an electrically
controlled valve.
With a complete valve & controller set, you can replace manually controlled globe valves with
automatic controlled steam valves. Installation of the new steam valves can be carried out by
the crew and/or during dry dock.
Jacket Water Heater stem with heating medium
Install automatic regulated steam valve to reduce the steam consumption from your pre-heater.